Mass Interconnect Products
Reconfigurable Modular Mass Interconnect Panel
| A. | ITA Enclosure | G. | Receiver |
| B. | ITA | H. | PCB Cable (Receiver) |
| C. | IEEE-515 Module (ITA) | I. | PCB Cable (ITA) |
| D. | IEEE-515 Cable Assembly (Rcvr.) | J. | SDI Cable |
| E. | Module (ITA) | K. | ITA Cable |
| F. | Cable Assembly (Rcvr.) |
Multi-Vendor Universal Reconfigurable Connector System
ATTI ODU Versatility
Signal
|
Economical Solution Operating voltage Rated impulse voltage Max continuous current Degree of pollution Mating cycles minimum |
32 V 1,500 V 6 A for 0.38 mm. 2 5,000 |
Power
|
Operating voltage Rated impulse voltage Max continuous current Degree of pollution Mating cycles minimum |
500 V 3,000 V 41 A for AWG 12 2 100,000 |
High Current
|
Operating voltage Rated impulse voltage Max continuous current Degree of pollution Mating cycles minimum |
500 V 3,000 V 154 A for 25 mm. 2 10,000 |
Coax
|
High Contact Density Frequency range Mating cycles minimum |
0 to 1.3 GHz 60,000 |
High Speed
|
Mating cycles minimum Suitable for all common bus systems USB 1.1, USB 2.0, USB 3.1 GEN 1, FireWire, Ethernet, CAT 5 |
10,000 |
ATTI ODU Universal Panel Mount Contact System
Can be used in most existing patch panel systems, for example: IEEE-1505, VPC, or Mac Panel Scout.
Only Connector Available For:
- IEEE-1505
- VPC-90
- Scout
- High power and coax contacts are also available
- Hybrid blocks mixing all contacts per user requirement can be created
.100 On Center Contact
- Maximizes cable options
- Ribbon cable
- Molded (impedance match)
- PCB
- Wire Wrap
- Crimp
- Mix and match pin types
- Highest electrical performance for a general purpose pin
- High pin density for IEEE-1505
- Best performance in VP-90
VP Series or IEEE-1505 (RFI/CTI)
Reconfigurable, modular mass interconnect panel (MIP) suitable as replacement for VPC and Mac Panel. Can be configured to include: coax, CTI, hyperboloid, and RFI signal pin connectors.
Connector Specifications
| ATTI 480 Pin Female Receiver | Leading Competitor |
| Max Current | |
| 4 Amps | 3 Amps |
| Contact Resistance | |
| <5 m ohms | <25 m ohms |
| Life Cycles | |
| 100,000 | 20,000 |
| Insulating Resistance | |
| 10K M ohms | 5K M ohms |
IEEE-1505 Mass Interconnect Panel Configurations
Mass Interconnect Panels are available in the following configurations:
- 4-Slot
- 8-Slot
- 12-Slot
- 16-Slot
- 20-Slot
- 24-Slot
- 2 x 8-Slot
- 2 x 8-Slot (2-Rack)
Patch Panels - RFI Receiver Components
Receiver Frames
| Part Number | Description |
| 20134006-10 | 4-Slot IEEE-1505 Receiver |
| 20134006-30 | 8-Slot IEEE-1505 Receiver |
| 20134006-50 | 12-Slot IEEE-1505 Receiver |
| 20134006-70 | 16-Slot IEEE-1505 Receiver |
| 20134006-110 | 24-Slot IEEE-1505 Receiver |
| 20134008-10 | 29-Slot NGATS Receiver |
| 20134095-110 | 24-Slot Dual Drive IEEE-1505 Receiver |
| 20134095-130 | 24-Slot IEEE-1505 Receiver 1 |
Modules Without Contacts
| Part Number | Description |
| 193-322 | Power Module (152 Position) |
| 193-312 | Power Module (59 Position) |
| 193-422 | Coax Module (152 Position) |
| 193-412 | Coax Module (59 Position) |
| 07030149-11 | Female Housing (10 Position) |
| 07030149-07 | Female Housing (4 Position) |
| 20134003-03 | Female Coax Housing (4 Position) |
| 20134005-03 | Female Power Housing (4 Position) |
| 20134465-01 | Connector, Elec, Power Module, 4 Slot, 23 A, (307 Position) |
| 20134468-01 | Connector, Elec, RF Module, Coax, 4 Slot, 7 GHz, (170 Position) |
Modules With Contacts
| Part Number | Description |
| 193-210 | Signal Contact (200 Position, Shrouded Box Posts) |
| 193-240 | Signal Contact (200 Position, PCB Straight) |
| 193-242 | Signal Contact (200 Position, PCB Right Angle) |
| 193-250 | Signal Contact (200 Position, PCB Transition to 4 x 25 x 2 Ejection Header) |
| 193-252 | Signal Contact (200 Position, PCB Extender) |
| 04000328-10 | Connector (200 Contact, Female) |
| 04000265-10 | Connector (500 Contact, Female) |
| 20134467-01 | Connector, Elec, Signal Module (200 Position, Female) |
| 20134470-01 | Connector, Signal Module, Rear Mount (200 Position, Female) |
Contacts
| Part Number | Description |
| 20134004-03 | Power Contact (12-14 AWG, Female) |
| 20134001-01 | Signal Contact (Female, Solder) |
| 07030159-03 | Signal Contact (Female, 0.25 Sq. Tail) |
| 20134001-03 | Signal Contact (Female, PCB) |
| 00002492-01 | Socket (RG316, DC-3 GHz) |
| 20134002-03 | Coax Contact (RG405/T-Flex, Female) |
Unterminated Patchcords (see Note 1)
| Part Number | Description |
| 196-342-96 | Power with Eight Feet of 14 AWG |
| 196-412-96 | Coax with Eight Feet of RG316 |
| 196-414-96 | Coax with Eight Feet of RG178 |
| 196-110-96 | Signal Box Pin with Eight Feet of 18-28 AWG (per 100) |
| 196-002-96 | Signal Hyperboloid 4 Block with Eight Feet of 18-28 AWG |
| Note 1 - Custom parts - available upon request. | |
Terminated Patchcords (see Note 1)
| Part Number | Description |
| 196-342-96L | Power with Eight Feet of 14 AWG to Lug |
| 196-412-96B | Coax with Eight Feet of RG316 to BNC |
| 196-414-96B | Coax with Eight Feet of RG178 to BNC |
| 196-412-96S | Coax with Eight Feet of RG316 to SMA |
| 196-414-96S | Coax with Eight Feet of RG178 to SMA |
| Note 1 - Custom parts - available upon request. | |
Protective Covers
| Part Number | Description |
| 191-504 | 4-Slot Receiver Cover |
| 191-509 | 9-Slot Receiver Cover |
| 191-524 | 24-Slot Receiver Cover |
| 191-529 | 29-Slot Receiver Cover |
Mounting Kits (19 Inch)
| Part Number | Description |
| 191-404 | 4-Slot Dual Drive Mount |
| 191-409 | 9-Slot Dual Drive Mount |
| 20134045-10 | 24-Slot Dual Drive Mount |
| 191-429 | 29-Slot Dual Drive Mount |
Connector Components
| Part Number | Description |
| 04000267-01 | End Cap, Connector |
| 04000267-02 | End Cap, Connector |
Patch Panels - RFI Receiver Assemblies
Custom Assemblies (see Note 1)
(This product is protected by the following patent: 7297031 B2)
| Part Number | Description |
| 20134200-10 | IEEE-1505 Receiver Assembly (This product is protected by the following patent: 7297031 B2) |
| 20134200-30 | IEEE-1505 Receiver Assembly (This product is protected by the following patent: 7297031 B2) |
| Note 1 - On-site source inspection required. | |
Patch Panels - VDATS Receiver Components
Patchcords (see Note 1)
| Part Number | Description |
| 20170500-10 | Prototype (0.100) Center to RG178 VDATS Receiver/Socket (minimum order - 100) |
| Note 1 - Custom parts - available upon request. | |
Patch Panels - ITA/Fixture/Plug/Male
ITA Frames
| Part Number | Description |
| 20134007-10 | 4-Slot IEEE-1505 ITA |
| 20134007-50 | 24-Slot IEEE-1505 ITA |
| 20134009-10 | 29-Slot NGATS ITA |
| 20134500-10 | 29-Slot IEEE-1505 ITA |
Modules Without Contacts
| Part Number | Description |
| 193-325 | Power Module (152 Position) |
| 193-323 | Power Module (59 Position) |
| 193-425 | Coax Module (152 Position) |
| 193-413 | Coax Module (59 Position) |
| 07030149-01 | Male Housing (4 Position) |
| 07030149-05 | Male Housing (10 Position) |
| 20134005-01 | Male Power Housing (4 Position) |
| 20134003-01 | Male Coax Housing (4 Position) |
Modules With Contacts
| Part Number | Description |
| 193-211 | Signal Contact (200 Position, Shrouded Box Posts) |
| 193-241 | Signal Contact (200 Position, PCB Straight) |
| 193-243 | Signal Contact (200 Position, PCB Right Angle) |
| 193-251 | Signal Contact (200 Position, PCB Transition to 4 x 25 x 2 Ejection Header) |
| 193-253 | Signal Contact (200 Position, PCB Extender) |
| 193-201 | Signal Contact (200 Position, Shrouded Hyperboloid Pins) |
| 04000328-30 | Connector (200 Contact, Male) |
| 04000265-30 | Connector (500 Contact, Male) |
Contacts
| Part Number | Description |
| 00002493-07 | Pin (RG316, Double Braided DC-3 GHz) |
| 07030160-01 | Signal Contact (Male, 0.25 Sq. Tail) (minimum order - 200) |
| 07030160-05 | Signal Contact (Male, 0.25 Sq. Tail) (minimum order - 100) |
| 07030161-01 | Signal Contact (Male, Crimp) |
| 07030161-03 | Signal Contact (Male, PCB) |
| 20134004-01 | Power Contact (12-14 AWG, Male) |
| 20134002-01 | Coax Contact (RG405/T-Flex, Male) |
| 20134466-01 | Power Contact (14 AWG, 23 A) Crimp-for Power Mdl 1 |
| 20134469-01 | Coax Contact, RF (7 GHz, RG-316) Crimp-for RF Mdl 193-441 |
| 20134475-01 | Signal Contact for the 200 Pin Connector Block |
| 20134476-01 | Power Contact for the RFI Power Block (14 AWG Wire) |
Unterminated Patchcords (see Note 1)
| Part Number | Description |
| 196-343-36 | Power with Three Feet of 14 AWG |
| 196-413-36 | Coax with Three Feet of RG316 |
| 196-415-36 | Coax with Three Feet of RG178 |
| 196-111-36 | Signal Box Pin with Three Feet of 18-28 AWG |
| 196-003-96 | Signal Hyperboloid x 4 Block with Three Feet of 18-28 AWG |
| Note 1 - Custom parts - available upon request. | |
Terminated Patchcords (see Note 1)
| Part Number | Description |
| 196-343-36L | Power with Three Feet of 14 AWG to Lug |
| 196-413-36B | Coax with Three Feet of RG316 to BNC |
| 196-415-36B | Coax with Three Feet of RG178 to BNC |
| 196-413-36S | Coax with Three Feet of RG316 to SMA |
| 196-415-36S | Coax with Three Feet of RG178 to SMA |
| Note 1 - Custom parts - available upon request. | |
Protective Covers
| Part Number | Description |
| 192-304 | 4-Slot ITA Cover |
| 192-309 | 9-Slot ITA Cover |
| 192-324 | 24-Slot ITA Cover |
| 192-329 | 29-Slot ITA Cover |
Cover Enclosures (see Note 1)
| Part Number | Description |
| 192-104 | 4-Slot Dual Drive Mount |
| 192-109 | 9-Slot Dual Drive Mount |
| 192-124 | 24-Slot Dual Drive Mount |
| 192-129 | 29-Slot Dual Drive Mount |
| Note 1 - Custom parts - available upon request. | |
Backshell Enclosures (see Note 1)
| Part Number | Description |
| 192-104-3 | 4-Slot Dual Drive Three-Inch Backshell |
| 192-104-6 | 4-Slot Dual Drive Six-Inch Backshell |
| 192-109-3 | 9-Slot Dual Drive Three-Inch Backshell |
| 192-109-6 | 9-Slot Dual Drive Six-Inch Backshell |
| 192-124-3 | 24-Slot Dual Drive Three-Inch Backshell |
| 192-124-6 | 24-Slot Dual Drive Six-Inch Backshell |
| 192-129-3 | 29-Slot Dual Drive Three-Inch Backshell |
| 192-129-6 | 29-Slot Dual Drive Six-Inch Backshell |
| Note 1 - Custom parts - available upon request. | |
Screw Down Panel Enclosures (see Note 1)
| Part Number | Description |
| 192-104A-6 | 4-Slot Dual Drive Six-Inch Box |
| 192-104A-12 | 4-Slot Dual Drive Twelve-Inch Box |
| 192-104A-18 | 4-Slot Dual Drive Eighteen-Inch Box |
| 192-109A-6 | 9-Slot Dual Drive Six-Inch Box |
| 192-109A-12 | 9-Slot Dual Drive Twelve-Inch Box |
| 192-109A-18 | 9-Slot Dual Drive Eighteen-Inch Box |
| 192-124A-6 | 24-Slot Dual Drive Six-Inch Box |
| 192-124A-12 | 24-Slot Dual Drive Twelve-Inch Box |
| 192-124A-18 | 24-Slot Dual Drive Eighteen-Inch Box |
| 192-129A-6 | 29-Slot Dual Drive Six-Inch Box |
| 192-129A-12 | 29-Slot Dual Drive Twelve-Inch Box |
| 192-129A-18 | 29-Slot Dual Drive Eighteen-Inch Box |
| 192-129A-24 | 29-Slot Dual Drive Twenty-Four-Inch Box |
| Note 1 - Custom parts - available upon request. | |
Hinged Panel Enclosures (see Note 1)
| Part Number | Description |
| 192-104B-6 | 4-Slot Dual Drive Six-Inch Box |
| 192-104B-12 | 4-Slot Dual Drive Twelve-Inch Box |
| 192-104B-18 | 4-Slot Dual Drive Eighteen-Inch Box |
| 192-109B-6 | 9-Slot Dual Drive Six-Inch Box |
| 192-109B-12 | 9-Slot Dual Drive Twelve-Inch Box |
| 192-109B-18 | 9-Slot Dual Drive Eighteen-Inch Box |
| 192-124B-6 | 24-Slot Dual Drive Six-Inch Box |
| 192-124B-12 | 24-Slot Dual Drive Twelve-Inch Box |
| 192-124B-18 | 24-Slot Dual Drive Eighteen-Inch Box |
| 192-129B-6 | 29-Slot Dual Drive Six-Inch Box |
| 192-129B-12 | 29-Slot Dual Drive Twelve-Inch Box |
| 192-129B-18 | 29-Slot Dual Drive Eighteen-Inch Box |
| 192-129B-24 | 29-Slot Dual Drive Twenty-Four-Inch Box |
| Note 1 - Custom parts - available upon request. | |
Connector Components
| Part Number | Description |
| 04000267-03 | End Cap, Connector |
| 04000267-04 | End Cap, Connector |
Patch Panels - ITA/Fixture/Plug/Male Assemblies
Custom Assemblies (see Note 1)
| Part Number | Description |
| 20134300-10 | IEEE-1505 ITA Assembly |
| 20134300-30 | IEEE-1505 ITA Assembly |
| 20134300-50 | IEEE-1505 ITA Assembly |
| 20134102-10 | Interface Test Adapter Box Modification (Modified) |
| 20134102-30 | Interface Test Adapter Box Modification (Modified) (quantity 1) |
| Note 1 - On-site source inspection required. | |
Patch Panels - VDATS ITA/Fixture/Plug/Male Assemblies
Patchcords (see Note 1)
| Part Number | Description |
| 20170501-10 | Prototype (0.100) Center to RG178 VDATS Plug/Pin (minimum order - 50) |
| Note 1 - Custom parts - available upon request. | |
Patch Panels - Common Parts
Modules Without Contacts
| Part Number | Description |
| 193-000-50 | Header (50 Position) |
| 07030149-13 | Pin Housing, Spacer 1W, Receiver/Fixture |
| 07030149-15 | Pin Housing, Spacer 2W, Receiver/Fixture |
| 07030149-17 | Pin Housing, Spacer 2.5W, Receiver/Fixture |
Modules With Contacts
| Part Number | Description |
| 20134082-10 | Pin Housing, 10 Sq. Tail Signal Loaded, Receiver |
| 20134083-10 | Pin Housing, 10 Sq. Tail Signal Loaded, Fixture |
Contacts
| Part Number | Description |
| 201016461-01 | Signal Contact (Box Crimp Type) (per 100) |
Protective Covers
| Part Number | Description |
| 20134072-01 | 1-Slot Wide Cover |
| 20134072-03 | 2-Slot Wide Cover |
| 20134072-05 | 3-Slot Wide Cover |
| 20134072-07 | 4-Slot Wide Cover |
| 20134073-01 | IEEE-1505, 24-Slot Cover, Receiver |
| 20134074-01 | IEEE-1505, 24-Slot Cover, Fixture |
Tooling
| Part Number | Description |
| 20134080-10 | Receiver, Coax Extraction Tool Assembly |
| 20134081-01 | Receiver, Coax Replacement Tip |
Connectors
| Part Number | Description |
| 04000266-01 | Rail, Connector |
| VPC is a trademark of Virginia Panel Corporation. Mac Panel is a trademark of MAC Panel Company. | |