ADVANCED TESTING TECHNOLOGIES, INC.

VXI and PXI Instruments

VXI

01001599-01
USB Controller

  • VXIBus 3.0 features including A64 addressing and 2eVME protocol
  • 32 MB/s sustained throughput across USB and VXI
  • Word-serial accelerator
  • USB 2.0-compatible, including “hot plug-in” capability
  • Direct trigger and interrupt control
  • External VXI CLK10 synchronization

04000044-01
Universal Power Meter

  • Dual channel power meter, peak or CW operation
  • > 150 readings per second
  • Frequency range:  10 MHz to 40 GHz, sensor dependent
  • Power dynamic range:  90 dB, sensor dependent
  • 1 mW power reference

07030001-10
Z51 Digital VXI Module

  • 50 MHz (TTL/CMOS) Dynamic Digital Subsystems

07040060-01
VXI-MXI Express Trigger Board

  • Remote Control for VXI
  • Data Rate: 2.5 Gbps

08020005-01
Bus Simulator
TPS compatible replacement instrument for obsolete ESTS instrument Bus Simulator

  • 2 channels, transformer coupled
  • 32 20-bit words per message
  • Manchester Bi-phase compatible
  • 40 V (p-p) max.

08020006-01
Counter/Timer/Digitizer
TPS compatible replacement instrument for obsolete ESTS instrument Counter/Timer/Digitizer

  • 2 channels
  • DC to > 100 MHz BW
  • Better than ± 25 mV sensitivity
  • > ± 7 V into 50 Ohm
  • > ± 100 V into 1 M Ohm

08020007-01
High Density (TTL-I/O) Card
TPS compatible replacement instrument for obsolete ESTS instrument High Density (TTL-I/O) Card

  • 256 TTL compatible pins
  • Source/Sink 24 mA max.
  • Programmable in groups of 8

08020008-01
Arbitrary Function Generator
TPS compatible replacement instrument for obsolete ESTS instrument Arbitrary Function Generator

  • 2 channels
  • Arbitrary plus 6 built-in waveforms
  • ± 7 Vdc to > 25 MHz

08020009-01
Signal Distribution System
TPS compatible replacement instrument for obsolete ESTS instrument Signal Distribution System

  • 72 user ports to > 100 MHz
  • 10 internal buses
  • On-board programmable resistance

08020010-01
Form C Relay Card
TPS compatible replacement instrument for obsolete ESTS instrument Form C Relay Card

  • 32 SPDT Form C relays
  • 4 A continuous max.
  • Closed contact resistance < 1.0 Ohm

08020015-01
Scanner Multiplexer
TPS compatible replacement instrument for obsolete ESTS instrument Scanner Multiplexer

  • 96 2-wire paths
  • 48 4-wire paths
  • 1 A max. current

08020016-01
Power Meter
TPS compatible replacement instrument for obsolete ESTS instrument Power Meter

  • CW and peak sensors
  • Frequency range:  10 MHz to 18 GHz
  • Amplitude range:  -70 to + 20 dBm

08020017-01
High Speed DWG
TPS compatible replacement instrument for obsolete ESTS instrument High Speed DWG

  • 96 stimulus/response pins or 48 bi-directional pins @ > 20 MHz
  • Multi-mode operation
  • LASAR TAP interface
  • > 1 M memory depth

08020100-10
Advanced Video System
TPS compatible replacement instrument for obsolete ESTS instrument Advanced Video System

  • 9 channels; 6 output, 3 input
  • Frequency range:  1 Hz to 50 MHz
  • Pixel time:  > 1/frequency
  • Pixel depth:  > 4 bits

08020101-10
H009
TPS compatible replacement instrument for obsolete ESTS instrument H009

  • 1 channel, dual-port relay controlled
  • Manchester Bi-phase compatible
  • 40 V (p-p) max.

08020103-10
Rubidium Reference
TPS compatible replacement instrument for obsolete ESTS instrument Rubidium Reference

  • 10 MHz (< ± 0.02 Hz)
  • 1 to 2 V (p-p) into 50 Ohm

08020104-10
Digital Multimeter
TPS compatible replacement instrument for obsolete ESTS instrument Digital Multimeter

  • 6.5 digits
  • 200 V peak max. input
  • Accuracies specified through 1 MHz

20191000-10
1140A VXIBus Synthesized Microwave Frequency Generator

  • High-Performance Microwave Signal Generation for VXIbus Systems

20202001-10
Z51 Digital VXI Module (Replaces Z50 Circuit Card Assembly)

  • 50 MHz (TTL/CMOS) Dynamic Digital Subsystems

92103848-01
Pattern Pod

  • Extends measurement accuracy to a DUT located up to 2 meters from the front panel
  • Each pod buffers the input and output signals for 2 of the 4 pattern I/O modules
  • 2 pods are required for each pattern I/O module
  • Provides input for tri-state control and external clock

92103849-01
C-Size Mainframe with Command Module

  • 13-slot mainframe for VXI plug-in modules
  • Handles advanced command interpreter
  • Provides cooling, power, digital communication interface bus
  • Expanded memory options available

92103850-01
160 MHz Timing I/O Module

  • Provides control signals for the DUT and timing for the sequence of patterns that are generated or recorded by the pattern I/O modules
  • Provides 12 pattern clocks
  • 2-slot width

92103851-01
20 MHz Pattern I/O Module

  • 32 I/O pins (4 ports of 8 bits each)
  • Maximum 20 MHz pattern rate using an external clock
  • 64K segmentable pattern depth
  • Each port can output, record, or perform a real-time compare
  • Programmatic or triggered tri-state on the fly
  • 1-slot width

92103852-01
Terminating 20 MHz Pattern I/O Module

  • 32 I/O pins (4 ports of 8 bits each)
  • Maximum 20 MHz pattern rate using an external clock
  • 64K segmentable pattern depth
  • Each port can output, record, or perform a real-time compare
  • Programmatic or triggered tri-state on the fly
  • Terminates the pattern clock lines
  • 1-slot width

92103855-03
Synchro/Resolver Simulator and Indicator

  • Independent digital to synchro channel and synchro to digital channel
  • Dynamic rate and directions
  • Programmable
  • Reference Input: 26 or 115 V rms
  • Signal I/O: 11.8, 26, and 90 V L-L
  • 1-slot width

92103897-01
Timing Pod

  • Extends measurement accuracy to a DUT located up to 2 meters from the front panel
  • An active device which improves the ability to drive DUT inputs and minimizes loading on DUT outputs - Buffers the 8 control signals out to the DUT as well as the 10 ‘Q’ lines, a ready line, and a trigger line into the timing I/O module

92105232-01
MXI-3 VXI Bus Interface Kit

  • VXI-PCI8340
  • Copper
  • 10 m
  • MXI-3 VXIbus Interface Kit for PCI

92105233-03
VXI-MXI-3 Command Module

  • VXI-8340
  • Single or Dual-Port
  • Copper Cable
  • VXI MXI-3 Interface Module

93000CCA-10
BRAT Switch Cards (BRAT 105)

93000068-01
QUAD 8-Bit Digital Input/Output Latch

  • 4 independently programmable 8-bit ports
  • TTL compatible I/O and control lines for GPIO handshake modes
  • Block mode transfer - 325 Kbytes/s
  • 1-slot width

93000075-01
Relay Matrix

  • 4 x 64, 8 x 32, or 16 x 16 2-wire switching matrix
  • Expand row and columns to make larger matrices with an optional cable or special expansion terminal module
  • 1-slot width

93000076-01
RF Multiplexer

  • Six 1 x 4 multiplexers
  • 50 Ohm or 75 Ohm characteristic impedance
  • Switch signals up to 3 GHz
  • 1-slot width

93000077-01
6 1/2-Digit Digital Multimeter

  • Functions: DCV, ACV, 2- and 4-wire Ohms, frequency, and period
  • 1-slot width

93000079-01
1-GSa/s Digitizing Oscilloscope

  • 2 channels, 1 GSa/s max. sample rate
  • 250 MHz bandwidth, single-shot or repetitive
  • 1-slot width

93000080-01
Arbitrary Function Generator

  • 13-bit resolution, 40 MSa/s
  • 256K sample memory with sequencer (custom waveforms)
  • Phase continuous frequency hopping
  • Linear or logarithmic frequency sweeping
  • 1-slot width

93000081-01
21 MHz Synthesized Function/Sweep Generator

  • Sine, square, triangle, negative and positive ramps, DC, and TTL clock waveforms
  • Amplitude and phase modulation
  • Multi-interval sweep and multi-marker mode
  • 2-slot width

93000157-01
64-Channel Scanning A/D Converter

  • 16-bit resolution, 100 KSa/s max. sample rate
  • Input options: DC volts, temperature, resistance, and strain gauge
  • 1-slot width

93000326-01
Dynamic Digital (32 Pin Groups)

  • 32 I/O pins (4 ports of 8 bits each)
  • 20 MHz pattern rate
  • 64K segmentable pattern depth
  • Each port can output, record, or perform a real-time compare
  • TTL/CMOS/ECL compatible logic
  • 2 associated pods

93000326-03
TTL Assembly, Dynamic Digital (32 Pin Groups)

  • TTL compatible logic
  • 32 I/O pins

93000326-05
CMOS Assembly, Dynamic Digital (32 Pin Groups)

  • CMOS compatible
  • 32 I/O pins

93000326-07
ECL Assembly, Dynamic Digital (32 Pin Groups)

  • ECL compatible logic
  • 32 I/O pins

93000326-09
Programmable Assembly, Dynamic Digital (32 Pin Groups)

  • ECL/TTL/CMOS compatible logic levels
  • 32 I/O pins

93000570-01
Digital Functional Test

  • 160 MHz timing module
  • 32 I/O pins (reference P/N 93000326-01)
  • 2-slot width
  • 1 associated timing pod

95000014-01
Peak, CW Power Meter

  • 10 MHz to 18 GHz
  • Dual channel
  • -70 to +20 dBm (CW sensor)
  • -20 to +20 dBm, peak
  • -30 to +20 dBm, CW (pulse sensor)
  • 1-slot width

95000015-01
Frequency Counter

  • 100 Hz to 20 GHz frequency coverage (expanded coverage available)
  • -15 dBm to +7 dBm input power range
  • Pulse and CW frequency measurements
  • Pulse parameter measurements performed
  • 1-slot width

95000016-01
Rubidium Frequency Standard

  • 10 MHz
  • 1 V rms into 50 Ohms
  • 5 x 10-11 initial accuracy
  • 5 x 10-11/month aging
  • Multiple outputs for system synchronization
  • 1-slot width

95000020-01
VXI Programmable Loads

  • 10 A, 75 V, 50 W
  • Constant current
  • Constant resistance
  • Short circuit
  • Pulsed loading
  • 1-slot width

95000022-01
VXI Dual-Channel Pulse Generator

  • 10 Hz to 100 MHz
  • Programmable pulse widths or duty cycles
  • 24 V p-p programmable amplitude
  • Period: 3.3 ns to 100 ms
  • Delay: 0 ns to period
  • 1-slot width

95000023-01
VXI Programmable Level Digital I/O Pins

  • Output HI level: -5 V to +15 V
  • Output LO level: +5 V to -15 V
  • Input HI threshold: -5 V to +15 V
  • Input LO threshold: +5 V to -15 V
  • 192 bidirectional 3-state pins
  • May be synchronized to yield up to 1152 pin digital interface
  • Memory depth: 32K
  • Speed: 25 MHz
  • 1-slot width

95000024-01
RF Control Module

  • Interface to VXI frequency synthesizers
  • Controls from 1 to 8 modules
  • Contains 10 MHz time base
  • 1-slot width

95000025-01
Microwave Frequency Synthesizer

  • 2 to 12 GHz
  • -90 to +10 dBm
  • Amplitude, frequency, and pulse modulation
  • Interfaces with downconverter to extend frequency range down to 10 MHz
  • 2-slot width

95000026-01
Downconverter Adapter

  • 10 MHz to 2 GHz
  • -90 to +5 dBm
  • Amplitude, frequency, and pulse modulation
  • Interfaces with microwave frequency synthesizer to provide greater frequency coverage
  • 1-slot width

95000027-01
VXI RF Multiplexer Module

  • Configurable: 16-1 x 4, 8-1 x 9, 4-1 x 19, 2-1 x 39, 1-1 x 79
  • 200 Vdc, 0.5 A, 10 W per channel
  • Bandwidth (-3 dB): 200 MHz
  • SWR (50 Ohm): < 1.3:1 at 100 MHz
  • 1-slot width

95000028-01
VXI Power Switching Module

  • 20 DPST relays
  • 350 Vac, 8 A, 240 W per channel
  • 1-slot width

95000029-01
VXI Open Collector Driver Module

  • 96 channels at 32 Vdc, 200 mA per channel
  • 1-slot width

95000031-01
Enhanced VXI Dual-Channel Pulse Generator

  • 10 Hz to 300 MHz  
  • Programmable pulse widths or duty cycles
  • 24 V p-p programmable amplitude
  • Period: 3.3 ns to 100 ms
  • Delay: 0 ns to period
  • 1-slot width

95000035-01
RF/Microwave VXI Chassis

  • Heavily shielded
  • Low noise linear power supply
  • 35 watts per slot

95000038-01
VXI Expansion Rack
Provides the ability to enhance an existing system with an expansion rack which contains a VXI high power mainframe and command module. The VXI expansion rack can accommodate two additional C-size VXI mainframes for a total of up to three VXI mainframes in the expansion rack.

95000048-01
20 GHz Synthesized Signal Generator

  • 0.01 to 20 GHz frequency range
  • 1 Hz resolution
  • +13 to -90 dBm leveled output power
  • 0.1 dB power resolution
  • AM, pulse, and complex modulation
  • 3-slot width

95000049-01
Synchro/Resolver Simulator and Indicator

  • 3 independent digital to synchro channels and synchro to digital channels (custom configurable)
  • Dynamic rate and directions
  • 1-slot width

95000050-01
ARINC-429 Test/Simulation and Monitor Card

  • Up to 10 ARINC-429 channels
  • Variable Tx amplitude control per Tx channel
  • Programmable rise/fall time per Tx channel
  • Programmable Tx inter-word gap (sync) time
  • 32K x 8 true dual-port RAM (8- and 16-bit transfers)
  • User definable Tx and Rcv buffer sizes per channel
  • 2 modes of receiver/monitor data storage modes (Sequential and Lookup Table)
  • ARINC filter table
  • Error injection (per block)
  • Error detection (per ARINC word)
  • Interrupt and polling capabilities in all modes
  • 1-slot width

95000051-01
ARINC-629 (DATAC) Simulation and Test Board

  • 16/8-bit data bus
  • Time tagging of messages
  • ARINC-629 compatible Serial Interface Module (SIM) (standard)
  • Open collector TTL (standard)
  • 128K x 16 double buffered data ram (dual ported)
  • 1-slot width

95650020-10
Driver Simulator

  • 2-axis closed loop actuator control
  • 3 open collector power switches (≤ 3 A @ 32 Vdc)
  • 1-slot width

95650095-10
Stimulus MUX IAU CCA

  • Interfaces with P/N 92103858-03 VXI switch
  • Allows customization of P/N 92103858-03 to provide the following multiplex configurations:
    • 2 x 128
    • 4 x 64
    • 8 x 32

95650095-30
Stimulus MUX IAU CCA

  • Interfaces with P/N 92103858-03 VXI switch
  • Allows customization of P/N 92103858-03 to provide the following multiplex configurations:
    • 2 x 128
    • 4 x 64
    • 8 x 32 

95650095-50
Stimulus MUX IAU CCA

  • Interfaces with P/N 92103858-03 VXI switch
  • Allows customization of P/N 92103858-03 to provide the following multiplex configurations:
    • 2 x 128
    • 4 x 64
    • 8 x 32

95650585-10
Digital Driver Simulator Module

  • 2-axis, analog closed-loop motor control
  • 3 high-side, open-collector general purpose drivers capable of delivering up to 3 amperes per driver
  • 2 switched, high-side open-collector actuator drivers capable of delivering 1 ampere per driver
  • Analog (LVDT) positional feedback inputs

96000001-01
50 MHz Digital Interface Timing Module

  • Full 50 MHz data rate
  • Store up to 32 different test programs
  • Dual-Processor architecture
  • 64K vectors
  • Maximum of 20 modules per controller
  • Multilevel triggering for logic analysis
  • Message based commands for easy test program development
  • A32/D32 binary transfer for high speed down loads
  • 1-slot width

96000001-03
50 MHz Timing/Control Module

  • Full 50 MHz data rate
  • Store up to 32 different test programs
  • Dual-Processor architecture
  • 64K vectors
  • Maximum of 20 modules per controller
  • Multilevel triggering for logic analysis
  • A32/D32 binary transfer for high speed down loads
  • SR5510 with Option 005

96000002-01
50 MHz TTL/CMOS/ECL Pattern Module

  • 32 input and 32 output pins per module
  • Full 50 MHz data rate
  • 64K vectors per channel
  • RAM-backed and algorithmic pattern generation
  • NRZ, RZ, RONE, RTC, and RI output data formats supported
  • 16 stimulus timing generators per module
  • 2 response generators per module
  • 100 ps edge placement resolution
  • 1-slot width

96000005-01
32-Bit Array Processor

  • Dual TMS320C30 processors
  • 33 MFLOP peak rate
  • Signal processing and imaging libraries
  • 2 to 8 Mbytes on board memory
  • VME 32-bit DMA master and shared memory interface
  • 1-slot width

96000007-03
50 MHz Variable I/O Module, 504 Configured, Dual Termination

  • 16 input and 16 output pins per module
  • Full 50 MHz data rate
  • 64K vectors per channel
  • RAM-backed and algorithmic pattern generation
  • NRZ, RZ, RONE, RTC, and RI output data formats supported
  • 8 stimulus timing generators per module
  • 2 response generators per module
  • 100 ps edge placement resolution
  • 1-slot width

96000012-01
32-Channel Differential ECL I/O Module

  • 32 input and 32 output pins per module
  • Full 50 MHz data rate
  • 64K vectors per channel
  • RAM-backed and algorithmic pattern generation
  • 16 stimulus timing generators per module
  • 2 response generators per module
  • 100 ps edge placement resolution

96000013-01
Timing Module Extension Card (Dual)

  • This unit increases the number of 5000 Series VXI cards the 5010 Timing Module can control

96000013-03
Timing Module Extension Card (Single)

  • This unit increases the number of 5000 Series VXI cards the 5010 Timing Module can control

96000014-01
High Power Mainframe - 6 Slots

  • 6-slot mainframe for VXI plug-in modules
  • Handles advanced command interpreter
  • Provides cooling, power, digital communication interface bus

96000014-03
High Power Mainframe - 13 Slots

  • 13-slot mainframe for VXI plug-in modules
  • Handles advanced command interpreter
  • Provides cooling, power, digital communication interface bus

96000016-01
VXI-MXI-2 Kit (With Cable)

  • Standard MXI-2 interface kit. Provides a slot 0 MXI-2 controller and PCI card controller, and associated software

96000016-03 (Without Cable)
VXI-MXI-2 Kit

  • Standard MXI-2 interface kit. Provides a slot 0 MXI-2 controller and PCI card controller, and associated software

96000017-01
VXI-MXI-2 Extender

  • Standard MXI-2 interface extender. Provides a slot 0 controller

96000017-03
VXI-MXI-3 Extender

  • Standard MXI-3 interface extender. Provides a slot 0 controller

96000137-10
RFI ECL Module I/O CCA

98000100-30
Programmable Video Generator and Analyzer Module (A-10)

  • Stroke Video (XYZ) functions integrated into a single-slot, C-sized, register-based VXI instrument
  • ± 20 V differential outputs (line to line) into 75 Ohm with 16-bit resolution
  • Automatic run time alignment accurate to 0.05% ± 2.5 mV
  • Sophisticated control structure provides the ability to simulate dynamic and interactive displays
  • Standard Stroke Video (XYZ) programming simplified with predefined macros
  • User programmable timing pulses for internal/external synchronization
  • Plug and Play compatible
  • Built-in test
  • All input/output via standard connectors - MCX 75 W coax (analog) and D-sub 62-pin (digital)
  • Turn-key operation

PXI

09010001-10
Dual Programmable DC Source - 30 W

09010002-10
Custom DC Controller - Programmable

09010003-10
Custom DC Slave - 28 V

09010004-10
Custom DC Slave - 24 V

09010005-10
Custom DC Slave - U500420

93006P0300
PXIe Digital Multimeter

  • Replaces VXI Digital Multimeter (E1412A/4252)
  • Digits of Resolution: 7.5
  • DC Voltage Range: -1000 V to 1000 V
  • DC Current Range: -3 A to 3 A
  • Maximum Sample Rate: 1.8 MS/s
  • Basic DC Voltage Accuracy: 12 ppm

93006P0500
PXIe Counter Timer

  • Replaces VXI Counter Timer (E1420B)
  • Frequency Measurement: 235 MHz
  • Resolution: 9 digits per second
  • Time Interval Resolution: 1 ns (100 ps with averaging)
  • Trigger Resolution: 2.5 mV
  • Programmable Measurement Timeout
  • Arming Modes: 9

93006P0700
PXIe Signal Conditioning CCA

  • Provides utility functions and interfacing required for the proper operation of the PXIe Insertion Kit

PXIe-100
PXI Conditioner Module with USB

  • Provides interface functions for VXI PXI/PXIe Insertion Kit

PXIe-200
PXI Instrument Interface Development Board

PXIe-201
PXI Instrument Interface Production Board

LXI

07040025-01
Portable Oscilloscope

  • 500 MHz Bandwidth
  • 4 Channels
  • 4 GSa/s Maximum Sample Rate (when two channels are interleaved)
 

Related Items:

PXI Insert