00002412-03
Electronic Load
- Power: 4000 W
- Voltage: 400 Vdc
- Current: 600 A
02000259-01
Programmable DC Electronic Load
- 4000 W DC load
- Constant current mode
- Constant voltage mode
- Constant power mode
- Constant resistance mode
- 500 Vdc max. voltage
02000259-03
Upgraded Programmable DC Electronic Load
- 4000 W DC load
- Constant current mode
- Constant voltage mode
- Constant power mode
- Constant resistance mode
- 500 Vdc max. voltage
04000045-01
CW Power Sensor
- 10 MHz to 18 GHz
- -70 to +20 dBm
04000046-01
Peak Power Sensor
- 45 MHz to 18 GHz
- -20 to +20 dBm, peak
- -30 to +20 dBm, CW
08020003-01
RF Generator #1
TPS compatible replacement instrument for obsolete ESTS instrument RF Generator #1
- 10 MHz to 18 GHz with 1 Hz resolution
- +13 to -90 dBm with 0.1 dB resolution
- AM, FM, and PM modulation
08020011-01
DC Power Supply
TPS compatible replacement instrument for obsolete ESTS instrument DC Power Supply
- 6 channels independently programmable
- 5, 32 V max., 10 mV resolution
- 5, 6.25 A max., 10 mA resolution
- 1 ADM/DAC high-voltage slave
08020012-01
AC Power Supply
TPS compatible replacement instrument for obsolete ESTS instrument AC Power Supply
- 4 channels independently programmable
- 4 auxiliary channels follow main
- Main output: 0 to 135 Vac
- Auxiliary output: 0 to 30.5 Vac
- Frequency range: < 350 Hz to > 1 KHz
08020013-01
High Voltage DC Power Supply
TPS compatible replacement instrument for obsolete ESTS instrument High Voltage DC Power Supply
- 1 channel ADM/DAC controlled
- 200 V max.
- 12 A max.
08020014-01
Spectrum Analyzer
TPS compatible replacement instrument for obsolete ESTS instrument Spectrum Analyzer
- 30 Hz to 18 GHz
- +30 dBm to noise floor reference
- RBW 1 Hz to 2 MHz
92103573-01
Single-Phase AC Programmable Power Supply
- AC supply 350 VA
- Frequency:
- Range: 0 to 5 KHz
- Resolution: 1 Hz
- Amplitude (350 VA max.):
- Range: 0 to 260 Vac
- Resolution: 0.1 Vac
92103598-01
IEEE Card
- Standard IEEE-488.2 interface
92103598-03
IEEE Card
- Standard IEEE-488.2 interface
92105229-01
IEEE Card Upgrade
- Replaces existing IEEE card as a result of Windows™ upgrade
- Includes removal of old card and installation of new card
- Requires P/N 3105SU-1, or P/N 3105SU-2, or P/N 3105SU-3
93000069-01
A/B to C-Size Module Carrier
93001001-10
KPA Synchronizer Simulator
- Radar pulsed repetition frequency simulator and recycler
94000855-01
Microwave Signal Generator
- Frequency:
- Range: 10 MHz to 18 GHz
- Resolution: 0.1 Hz
- +10 to -120 dBm amplitude range
- Excellent spectrum purity
- Modulation capabilities (pulse, AM, FM)
- Rack mountable
94000887-01
DC Power Supply Frame
- Rack mountable
- Can hold up to 6 DC modules, any combination (94000888-01, 94000889-01, 94000890-01, 94000891-01, 95000042-01, 95000043-01, 95000044-01, 95000045-01)
94000890-01
0 to 32 V Module for DC Power Supply
- 6.25 A max.
- 200 W
- For use in 94000887-01
94000969-01
Agile Signal Generator
- 252 KHz to 1030 MHz frequency range
- 15 ms frequency switching
- Stand-alone control of frequency agility
- Specified performance while fast hopping
- FM rates to 10 MHz, deviations to 20 MHz
- Low spurious and phase noise
- Rack mountable
94001246-01
VXI Microwave Synthesizer, 10 MHz to 20 GHz
- Frequency range: 10 MHz to 20 GHz
- Output power: -90 to +20 dBm
- AM, FM and pulse modulation
- I/Q modulation (40 MHz bandwidth)
94001253-03
Microwave Synthesizer
- Frequency range: 10 to 18 GHz (1 MHz resolution)
- Output power: +10 to -110 dBm (0.1 dB resolution)
- Internal/External modulations: AM, FM, PM
94100508-01
Dual High Current AC Power Supply
- Programmable single- or 3-phase output
- 0 to 312 V rms Line to Neutral
- 26 A at 270 V per phase
- DC or 40 Hz to 5 KHz
94100750-01
Power Distribution Unit
- For use with Master and Slave Three-Phase Power Supplies
- Provides interconnect between Master and Slave
94100751-01
Three-Phase Power Supply (Master)
- For use with Power Distribution Unit and Slave Three-Phase Power Supply
- Range: 0 to 312 Vac
- Frequency: DC to 5 KHz
- Rack mountable
94100752-01
Three-Phase Power Supply (Slave)
- For use with Power Distribution Unit and Master Three-Phase Power Supply
- Range: 0 to 312 Vac
- Frequency: DC to 5 KHz
- Rack mountable
94101177-01
136-Channel Logic Analyzer
- Channel count: 136
- Timing analysis speed: 250 MHz
- State analysis speed: 150 MHz
- Memory depth: 2 M
95000010-01
Traveling Wave Tube Amplifier
- 8 to 12.4 GHz - 40 dB minimum gain
- +43 dBm (20 watts) minimum output power
- Rack mountable
95000011-01
High-Performance Signal Generator
- 100 KHz to 1.0575 GHz
- 1 Hz resolution
- -140 to +20 dBm output power
- Phase, amplitude, frequency, and pulse modulation
- Rack mountable
95000012-01
Spectrum Analyzer
- 100 Hz to 1.5 GHz
- -135 to +30 dBm
- 20 ms to 1500 s sweep times
- Rack mountable
95000013-01
Frequency Counter
- DC to 1.3 GHz
- 100 mV to 1 V rms dynamic range
- ±5 Vdc max.
- Rack mountable
95000017-01
RF Network Analyzer
- 0.1 to 500 MHz
- Integrated source
- Full accuracy enhancement
- Transmission and reflection measurements (amplitude and phase) performed
- Rack mountable
95000018-03
Microwave Network Analyzer
- 50 MHz to 20 GHz
- Integrated source
- Full accuracy enhancement
- Transmission and reflection measurements (amplitude and phase) performed
- Time domain capability
- Rack mountable
- Frequency offset mode
- Calibration kit
95000042-01
0 to 10 V Module for DC Power Supply
- 12 A max.
- 120 W
- For use in 94000887-01
95000043-01
0 to 40 V Module for DC Power Supply
- 5 A max.
- 200 W
- For use in 94000887-01
95000044-01
0 to 80 V Module for DC Power Supply
- 2.5 A max.
- 200 W
- For use in 94000887-01
95000450-10
Auxiliary RF Signal Processor/Matrix
- Switching and attenuation DC to 18 GHz
- HF synthesis, low noise target generator (optional), and amplification
95000450-50
Auxiliary RF Signal Processor/Matrix
- Switching and attenuation DC to 18 GHz
- HF synthesis, low noise target generator, and amplification
95000524-10
Phase Noise Measurement Drawer
- Measures phase noise at frequencies between 150 MHz (VHF) and 10.5 GHz
(X band)
- Measures AM noise at frequencies between 150 MHz and 10.5 GHz
- Generates low noise signal outputs between 10 MHz and 10.5 GHz
- Provides signal switching, downconversion, amplification
- Unit is housed in a rack-mountable drawer
95001000-10
Target Generator/Dual-HF Synthesizer, Including Virtual Spectrum Analyzer Software Utility
- Provides stable low spurious, highly stable programmable waveforms, and triggering functions
- Provides additional dual-HF synthesizer capability
95650134-10
Rack Mount Oscilloscope
95650138-10
Cable Tester Assembly
- Computer controlled system
- Tests products ranging from aircraft cables to complex black boxes
- Provides real-time, on-line control over testing
- Flexibility in programmable stimulus for insulation and continuity testing
95650138-30
Cable Tester Assembly
95650701-01
Digital Oscilloscope
- 4-channel operation
- 500 MHz bandwidth
96000021-01
1 KW Programmable Power Supply
- 0 to 33 Vdc @ 33 A max.
- Load, line resolution: 33 mV, 33 mA
- Programming resolution: voltage, current: 0.03% F.S.
- Programming accuracy:
- voltage: ±0.05% + 0.4% of VOUT max.
- current: ±0.01% + 0.4% of IOUT max.
96740017-05
Peak Power Meter
- High resolution color display
- Front panel menu or IEEE remote operation
- Pulsed RF measurements from -24 to +20 dBm
- CW measurements from -34 to +20 dBm
- Balanced diode sensing for even-order harmonic suppression
- 1 MHz sampling rate
- 1 GHz internal calibrator
96740017-07
Dual-Channel Peak Power Meter
- CW and pulsed RF signals
- Peak and average power
- 500 MHz to 18 GHz
- -40 to +20 dBm (pulsed)
- -50 to +20 dBm (CW)
96740021-01
Frequency Synthesizer
- Front panel controls or BCD remote operation
- Frequency hopping: < 1 µs
- Frequency range: 0.01 to 4.6 GHz
- Power output: to 10 dBm
- Direct analog synthesis using 10 MHz source
96740021-05
Frequency Synthesizer
- Front panel controls or BCD remote operation
- Frequency hopping: < 200 ns
- Frequency range: 0.01 to 3.0 GHz
- Power output: to 10 dBm
- Direct analog synthesis using 10 MHz source
- Improved reliability